Multilayer sorption parameters: BET or GAB values?

The differences between the sets of values for the monolayer capacity and the energy constant obtained by sorption data regressions using two related multilayer sorption isotherms, the two-parameter BET (Brunauer–Emmett–Teller) and the three-parameter GAB (Guggenheim–Andersen–de Boer) isotherms, are analysed. Experimentally, it is found that the GAB monolayer value is always higher than the BET value and the GAB energy constant results always lower than the BET constant. Mathematical and physical reasons are given which explain these differences. The third GAB parameter determines the greater versatility of the GAB equation, which has a quite larger range of applicability than the BET isotherm. It is shown that in terms of the three GAB constants, the two BET parameters are qualitatively and quantitatively reproduced as well as their dependence on the regression interval used in the BET regression, justifying in this way the above-mentioned inequalities. The typical upswing in the BET plots after a (pseudo) linear range at lower activities of the sorbate is also explained. All these findings are exemplified using experimental sorption data of several systems of very distinct chemical nature. A complete regression procedure for sorption data in terms of the GAB isotherm is advanced.     

电容层析成像的BP网络重建

电容层析成像系统在工业上用于管道内流体的实时监测，本文提出用神经网络的方法来代替传统的反投影算法进行图像重建，以解决传统算法存在的扭曲形变和空间精度受限的问题．文中用改进的ＢＰ算法训练，采用一个两层感知机网络，网络的输入是预处理过的测量电容矢量，输出直接对应到空间图像．实验结果表明使用这一方法，能重建出足够精确的图像     

Multilayer effects in adsorption of alcohols from benzene andn-heptane on silica gel

Experimental data for the title systems are compared with calculations based on theoretical adsorption parameters.

---

Mehrschichteffekte bei der Adsorption von Alkoholen aus Benzol undn-Heptan auf Silicagel (Kurze Mitteilung)

Zusammenfassung Für die im Titel genannten Systeme werden experimentelle Daten mit Berechnungen verglichen, die auf theoretischen Parametern basieren.

     

基于多壁碳纳米管/二茂铁接枝壳聚糖的核/壳结构组合物多层膜电极的组装及其电催化

以聚二烯丙基二甲基氯化铵(PDDA)修饰的玻碳电极(GCE)为基础电极, 利用静电层-层自组装的方法将多壁碳纳米管/二茂铁接枝壳聚糖的核/壳结构组合物(MWCNTs@CHIT-Fc)和聚苯乙烯磺酸钠(PSS)在该电极表面进行交替多层组装. 用循环伏安(CV)、紫外-可见光谱(UV-Vis)和扫描电子显微镜(SEM)等方法对组装过程进行了跟踪表征. 用CV方法研究了抗坏血酸(AA)在该多层膜电极上的电催化氧化. 研究结果表明, 当MWCNTs@CHIT-Fc为6个双层时, AA在该修饰电极上的氧化峰电位与裸GCE相比降低了约0.4 V. 用控制电位电流法研究了不同MWCNTs@CHIT-Fc双层时AA的电流响应. 用该电极测定了AA的灵敏度, 检测限及线性范围等性能参数可通过控制组装的MWCNTs@CHIT-Fc双层数进行调节.     

溶胶-凝胶法制备GaInP/GaAs/Ge三结太阳能电池梯度折射率减反膜

为了减少太阳能电池表面反射,提高多结太阳能电池效率,针对GaInP/GaAs/Ge三结太阳能电池和AM0光谱,设计了折射率梯度排列的四层减反膜系结构.利用溶胶-凝胶技术,通过对材料折射率的定向调节,制备了折射率梯度排列的TiO_2/ZrO_2/酸性SiO_2/碱性SiO_2四层减反膜.实验结果表明,镀膜后的三结太阳能电池在300~1 700 nm波长范围内的加权平均反射率由原先的28.58%降低至4.86%,最高反射率由46.35%降低至15.45%.     

Electrophoretic separation method for membrane pore‐forming proteins in multilayer lipid membranes

In this paper, we report on a novel electrophoretic separation and analysis method for membrane pore‐forming proteins in multilayer lipid membranes (MLMs) in order to overcome the problems related to current separation and analysis methods of membrane proteins, and to obtain a high‐performance separation method on the basis of specific properties of the lipid membranes. We constructed MLMs, and subsequently characterized membrane pore‐forming protein behavior in MLMs. Through the use of these MLMs, we were able to successfully separate and analyze membrane pore‐forming proteins in MLMs. To the best of our knowledge, this research is the first example of membrane pore‐forming protein separation in lipid membranes. Our method can be expected to be applied for the separation and analysis of other membrane proteins including intrinsic membrane proteins and to result in high‐performance by utilizing the specific properties of lipid membranes.     

CeO2纳米层对多层载体x-CeO2/3DOM Al2O3负载纳米Au催化剂催化柴油炭烟燃烧活性的影响

与汽油车相比,柴油车具有CO2排放低、寿命长和经济性好等优点,所以近年来受到广泛关注并被大量使用.但是,柴油车在使用过程中会产生大量炭烟颗粒物(PM),对大气环境和人类健康造成很大威胁.因此,开展这方面的基础研究具有重要的科学意义及环境保护意义.催化柴油炭烟燃烧反应是一个气-固-固多相深度氧化反应,由于PM的粒径远大于传统催化剂,导致PM不能进入催化剂孔道内部,造成催化剂活性比表面积利用率较低.设计并制备大孔径的三维有序大孔结构(3DOM)的催化剂,能够减小反应扩散阻力,增加催化剂与炭烟颗粒物的有效接触,加快反应进行.另外,可以通过在3DOM氧化物表面担载其它活性组分,提高催化剂的氧化还原性能,进而提高其活性.CeO2有很好的储放氧性能,在柴油车尾气净化催化剂中较为常见,但是单一的CeO2热稳定性较差,高温下容易烧结,使得比表面积减小,并且失去储氧能力,造成催化剂失活.文献中较常见的解决办法是在CeO2中掺杂其它阳离子,如Zr4+,Pr3+,Al3+,La3+及Y3+等离子,以提高CeO2的抗高温烧结能力.此外,研究报道的催化剂对催化柴油炭烟颗粒物燃烧的峰值温度已经远低于炭烟颗粒物的自燃温度,但是对颗粒物的起燃温度仍普遍较高.我们前期研究结果表明,担载纳米Au颗粒催化剂能够显著降低炭烟燃烧的起燃温度.本文采用胶体晶体模板法制备了3DOM Al2O3载体,利用微孔膜-氨沉淀法担载不同量的活性组分CeO2,制备出一种负载型x-CeO2/3DOM Al2O3催化剂,它既可减少稀土元素用量,降低成本,又因为Al2O3的机械强度较高,还能保证催化剂的机械强度足够好.为了进一步降低催化剂催化炭烟燃烧的起燃温度,利用还原沉积法在多层载体x-CeO2/3DOM Al2O3上负载纳米Au催化剂,制备出不同厚度的CeO2纳米层负载Au催化剂(Au/x-CeO2/3DOM Al2O3).利用X射线衍射、扫描电镜、透射电镜、H2程序升温还原和O2程序升温脱附等方法研究了催化剂的结构及物化性质与催化剂活性之间的关系,提出了消除PM反应的可能机理.结果表明,Al3+离子能够部分进入到CeO2中,形成Al-Ce固溶体.由于Al离子半径小于Ce离子,Al3+掺杂后能引起CeO2晶格发生畸变,产生大量缺陷,形成大量氧空位,促进晶格氧的移动,从而使催化剂具有更大的储放氧能力.在Au/x-CeO2/3DOM Al2O3催化剂中,CeO2担载量过高时,氧化铈纳米层较厚,活性组分容易烧结,不利于催化剂活性提高;而CeO2担载量过低,则CeO2纳米层较稀薄,催化剂的氧化还原性能受限,催化剂活性也不高.因此,CeO2的担载量应适当.此外,Au和CeO2之间的强相互作用能够增加Au纳米颗粒表面活性氧物种的数量,从而促进柴油炭烟燃烧反应.活性测试结果表明,担载纳米Au颗粒后,催化剂催化柴油炭烟燃烧的起燃温度均明显降低,在所制备的系列催化剂中Au/20％CeO2/3DOM Al2O3催化剂展示了最高的催化活性,T10,T50和T90分别为267,372和426 oC.     

Tubing modifications for countercurrent chromatography (CCC): Stationary phase retention and separation efficiency

Countercurrent chromatography (CCC) is a separation technique in which two immiscible liquid phases are used for the preparative purification of synthetic and natural products. In CCC the number of repetitive mixing and de-mixing processes, the retention of the stationary phase and the mass transfer between the liquid phases are significant parameters that influence the resolution and separation efficiency. Limited mass transfer is the main reason for peak broadening and a low number of theoretical plates along with impaired peak resolution in CCC. Hence, technical improvements with regard to column design and tubing modifications is an important aspect to enhance mixing and mass transfer.     

基于非线性光谱混合模型的遥感影像提取城市不透水层

针对传统方法在提取城市不透水层中的许多局限性,采用两种非线性光谱混合分解模型,包括混合调谐匹配滤波和多层感知器神经网络,通过混合像元分解获取城市不透水层.混合调谐匹配滤波利用用户选择的端元,通过最大化端元响应并减少未知背景信息的影响,进行局部分解端元.多层感知器由多个感知器组成,能够很好的进行非线性学习.对Landsa...     

Interfacial thermal resistance in multilayer graphene structures

The cross-plane thermal conductivities of multilayer graphene are investigated using nonequilibrium molecular dynamics simulation. It is found that the interfacial thermal resistance in multilayer graphene structures is strongly layer number dependent. It decreases with increasing layer number and reaches a limit as layer number is large enough. The interfacial thermal resistance for graphite and multilayer graphene has an anomalous relationship with temperature compared with that in superlattice structures. It increases with the temperatures above room temperature, which is attributed to phonon tunneling effects. Phonon tunneling probability is reduced due to the decreased phonon wavelength while temperature rises, which in turn causes the increased interfacial thermal resistance.